Denon AVR-2311 - Playing a USB memory device; Important information on USB devices; Playing files stored on USB devices

24
ENGLISH
Playing an iPod
®
w
Connect an iPod directly to the USB port
to play back
You can use the USB cable provided with the iPod
®
to connect the
iPod with the unit’s USB port and enjoy music stored on the iPod.
• This unit supports audio playback from the iPod (fifth generation
or later), iPod nano, iPod classic, iPod touch and iPhone (it is not
compatible with iPod shuffle).
1
Connect the iPod
®
to the USB port (vpage 18
“Connecting an iPod or USB memory device to the
USB Port”).
2
Press POWER ON to turn on power to the unit.
3
Press NET/USB to switch the
input source to “USB/iPod”.
[1/9]
Playlists
Artists
Albums
Songs
Podcasts
Genres
Composers
Music
SEARCH Search
NOTE
If the connections screen is not displayed,
the iPod may not be properly connected.
Reconnect it.
4
Press SEARCH and hold it down for 2 seconds or
more to select the display mode.
• There are two modes for displaying the contents recorded on the
iPod.
Browse mode
Display iPod information on the TV screen.
• English letters, numbers and certain symbols are displayed.
Incompatible characters are displayed as “.” (period).
Remote mode
Display iPod information on the iPod screen.
• “Remote iPod” is displayed on the display of this unit.
• The Remote mode is not supported on fifth generation iPod or
first generation iPod nano.
Display mode
Browse mode Remote mode
Playable
files
Music file
P P
Video file
z
Active
buttons
Remote
control unit
(This unit)
P P
iPod
®
P
zOnly the sound is played.
5
Use ui to select the item, then press ENTER or p
to select the le to be played.
6
Press ENTER, p or 1.
Playback starts.
• You can specify the duration of the on-screen display to be displayed
(default: 30 sec) at menu “iPod” (vpage65). Press uio p to
return to the original screen.
• To play back compressed audio with extended bass or treble
reproduction, we recommend playback in RESTORER mode
(vpage57). The default setting is “Mode 3”.
• In Browse mode, press
STATUS during
playback to check the title name, artist
name, and album name.
NOTE
• Depending on the type of iPod and the software version, some
functions may not operate.
• Note that DENON will accept no responsibility whatsoever for any
problems arising with the data on an iPod when using this unit in
conjunction with the iPod.
n iPod operation
Operation buttons Function
MENU Amp menu
uio p
Cursor operation
z1
ENTER Enter
z2
SEARCH
(Press and release)
Page search mode
z3
SEARCH
(Press and hold)
Browse / Remote mode switching
RETURN Return
6 7
(Press and hold)
Manual search
(fast-reverse/fast-forward)
1
Playback / Pause
8 9
Auto search (cue)
3
Pause
2
Stop
RESTORER RESTORER
TV POWER TV power on/standby (Default : SONY)
TV INPUT Switch TV input (Default : SONY)
• Repeat playback (vpage52 “Repeat”)
• Shuffling playback (vpage52 “Shuffle”)
z1 If you press
ui during playback, auto search starts. If you press
and hold ui, manual search starts.
z2 If you press ENTER during playback, playback pauses. If ENTER is
pressed during pause, playback resumes.
If you press and hold ENTER, playback stops.
z3 This functions when an ASD-1R, ASD-11R is used.
Press SEARCH, then press o (previous page) or p (next page).
To cancel, press ui or SEARCH.