(5) All reset function
• This function is for resetting all the settings to the factory defaults.
1
Press the power ON/SOURCE button and the OFF button at
the same time. "PRE" appears on the remote control unit's
display.
OFF 0N/_llr_
Use the • and • cursor buttons to display "RST" on the
remote control unit, then press the ENTER button.
Use the • and • cursor buttons to display "ALL" on the
remote control unit, then press the ENTER button.
• The LCD's back light flashes during the resetting operation,
and when the operation is completed, "OK" is displayed
and the set returns to the normal operating mode.
0 O O O
2,3 _
1
2,3
46
To Next Page
Loading...
