Partner: Denon
Model: AVR-3805 & AVR-2805
Device Type: Receiver
CONTROL:
Power_On/Off/Toggle D Pulse to turn the receiver’s main power on and off.
Main_Volume_Up/Down D Press and hold to adjust the main zone’s volume level.
Main_Volume_Mute_On/Off/Toggle D Pulse to turn the main zone’s volume mute on and off.
Input_* D Pulse to select the input.
Main_Zone_On/Off D Pulse to turn the main zone on and off.
<Surround_Modes> D Pulse to select the surround mode for the main zone.
<Channel>_Up/Down D Press and hold to adjust the channels gain up and down.
Auto/PCM/DTS/ANALOG/External_In D Pulse to select the digital audio input.
Video_Input_* D Pulse to select the video break source. This will not change the audio input.
Zone_*_On/Off D Pulse to turn the zone on and off.
Zone_*_Volume_Up/Down D Press and hold to adjust the zone’s volume level.
Zone_*_<Input> D Pulse to select the input for each zone.
Tone_Defeat_On/Off D Pulse to turn the tone defeat on and off.
Rear_Surround_* D Pulse to select the rear surround speaker mode.
Cinema_EQ_On/Off D Pulse to turn the Cinema EQ on and off.
Mode_Set_To_* D Pulse to set the mode.
Record_* D Pulse to select the record output source.
Tuner_Band_AM/FM D Pulse to set the tuner’s band.
Tuning_Mode_Auto/Manual D Pulse to set the tuning to auto tune or manual tune.
Tuner_Next/Previous_Preset D Pulse to step through the tuner presets.
Tuner_Preset_* D Pulse to select the desired preset.
To Next Page
Loading...
