Denon AVR-4810CI - Page 21

21
AVR-4810CI/AVR-4810
3. Mode for switching tuner frequency step ---E2 model only---
E
3.1. Operation specification
Change tuner frequency step to FM:200kHz/AM:10kHz STEP.
Starting up:
1.With the "STANDARD" and "DIRECT/STEREO" buttons pressed, press the "ON/OFF"
button to turn the power on.
䇭"*Tuner FRQ Set"䇭appears on the display.
*Tuner FRQ Set
<AM9/FM50>
2.Use 䂴䂪 and select "<AM10/FM200>".
*Tuner FRQ Set
<AM10 / FM200>
3.Press the "ENTER" button.
4. Press the "ON/OFF" button to turn the power off.
5. Then, press the "ON/OFF" button to turn the power on.
NOT
: Backup data(Remove settings for Installer Setup) initialization is carried out automatically.
s