Denon AVR-5805 - Easy-to-Use Functions; Connections Guide

29.Mar.06
9/25
CV COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section)
The BOLD COMMANDS are new.
COMMAND PARAMETER
function example
CV
EXLC UP CVEXLC UP<CR>
EXLC DOWN
---EX L(C) ch
CVEXLC DOWN<CR>
EXLC **
**:38 to 62 by ASCII , 50=0dB
CVEXLC 50<CR>
EXRC UP CVEXRC UP<CR>
EXRC DOWN
---EX R(C) ch
CVEXRC DOWN<CR>
EXRC **
**:38 to 62 by ASCII , 50=0dB
CVEXRC 50<CR>
MU ON OUTPUT MUTE ON/OFF change MUON<CR>
OFF MUOFF<CR>
SI PHONO Select INPUT source SIPHONO<CR>
CD SICD<CR>
TUNER SITUNER<CR>
DVD SIDVD<CR>
VDP SIVDP<CR>
TV SITV<CR>
DBS SIDBS<CR>
VCR-1 SIVCR-1<CR>
VCR-2 SIVCR-2<CR>
VCR-3 SIVCR-3<CR>
VCR-4 SIVCR-4<CR>
V.AUX SIV.AUX<CR>
CDR/TAPE SICDR/TAPE<CR>
DTU SIDTU<CR>
ZM ON MAIN-ZONE ON/OFF change ZMON<CR>
OFF ZMOFF<CR>
SV DVD VIDEO SELECT mode set , and select source SVDVD<CR>
VDP SVVDP<CR>
TV SVTV<CR>
DBS SVDBS<CR>
VCR-1 SVVCR-1<CR>
VCR-2 SVVCR-2<CR>
VCR-3 SVVCR-3<CR>
VCR-4 SVVCR-4<CR>
V.AUX SVV.AUX<CR>
SOURCE VIDEO SELECT mode cancel SVSOURCE<CR>