To Next PageTo Next PageHow to fix a Denon Receiver that does not turn on?
If your Denon Receiver isn't powering on, check the following: * Ensure the power plug is correctly inserted into the power outlet. * If the protection circuit is active, disconnect the power plug from the outlet, wait 5 to 10 seconds, and then plug it back in.
General| Channels | 5.1 |
|---|---|
| Power Output | 75 W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD) |
| Frequency Response | 10 Hz - 100 kHz (+1, -3 dB) |
| Input Sensitivity/Impedance | 200 mV / 47 kohms |
| Signal-to-Noise Ratio | 98 dB |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Audyssey | Audyssey MultEQ |
| HDMI Pass-Through | Yes |
| Tuner Bands | AM/FM |
| Preset Station Qty | 56 |
| Total Harmonic Distortion | 0.08% |
| Tuner Frequency Range | FM: 87.5 - 107.9 MHz, AM: 520 - 1710 kHz |
| Dolby Support | Dolby Digital, Dolby Digital Plus |
| DTS Support | DTS-HD Master Audio |
| Dimensions | 434 x 167 x 382 mm |
| Weight | 21.6 lbs (9.8 kg) |
