ENGLISH
Getting Started
Connections Remote Control Information Troubleshooting
SpecificationsMulti-ZoneSettings
Playback
Playing Components
1
Prepare for playback.
①Turn on the power of the TV, subwoofer and player.
②Set the TV’s input to the AVR-790.
③Load the disc in the player.
2
Turn on the AVR-790’s power.
(vpage 17“Turning the Power On”)
3
Press and select the input
source.
If “TUNING PRESET” is selected for
preset channel, press before turning
.
4
Play the component connected to
the AVR-790.
Make the necessary settings on the
player (language setting, subtitles
setting, etc.) beforehand.
5
Use to adjust the volume.
GVariable rangeH
– – –
–80.0dB ~ 18.0dB
※The variable range differs according to the input signal and channel
level setting.
6
Select the desired surround mode.
(vpage 42“Selecting the Surround Mode”)
7
Adjust the desired sound eld effects.
(vpage 44“Adjusting the Sound Field Effects”)
The following describes the procedure for playing Blu-ray disc/
DVD players.
Use the same procedure to play other components.
Playing Blu-ray Disc / DVD Players
The music / video on an iPod can be played by using the control
dock for iPod (ASD-1R, ASD-11R, ASD-3N or ASD-3W sold
separately).
Connect the control dock for iPod beforehand. (vpage 14
“iPod
®
”).
iPod
®
Playback
1
Prepare for playback.
q Set the iPod in the DENON control dock
for iPod.
w Assign the control dock for iPod’s input
(vpage 33).
eSet to “MAIN/TV” to “MAIN”.
2
Turn on the AVR-790’s power.
(vpage 17“Turning the Power On”)
3
Press to select the input source assigned in step 1-
w above.
(iPod screen)
b If the screens above are not displayed, the iPod may not be
properly connected. Try connecting again.
Listening to music on an iPod
®
OK to disconnect.
Front
Adjusting the Sound Field Effects (Parameter)
(vpage 44)
Playing Components (vpage 38)
n Playing Blu-ray Disc/DVD Players (vpage 38)
n iPod® Playback (vpage 38)
n Listening to FM/AM Broadcasts (vpage 39)
n Listening to SIRIUS Satellite Radio Programs
(vpage 40)
n Operations During Playback (vpage 42)
n Operation Flow
Before starting playback, make the connections between the
different components and the settings on the receiver.
Selecting the Surround Mode (vpage 42)
q Standard Playback (vpage 42)
w Playing in a DENON original surround mode
(vpage 43)
e Direct Playback (vpage 43)
r Stereo Playback (vpage 44)
t Playing the Pure Direct mode (vpage 44)
NOTE
●Also refer to the operating instructions of the connected
components when playing them.
●External devices can be controlled by remote control unit
(vpage 52 “Operating the Connected Devices by Remote
Control Unit”).
See overleaf
Front
Front
Playback
To Next Page
Loading...
Need help?
General
