Denon AVR-987

37
Basic Operation Basic Operation
Checking the XM signal strength and Radio ID
XM000 RADIO ID
Radio ID
Either turn
<
FUNCTION
>
or press [TUNER] to
select “TUNER”.
Press
<
STATUS
>
until “SIGNAL” is displayed.
• The display changes as shown below according to the
receiving condition.
Press [BAND] to select “XM”.
1
2
3
Adjust the antenna location until
“SIGNAL:GOOD” is displayed.
4
Press
<
STATUS
>
until the XM channel
(ex.XM001) is displayed.
5
Press [TUNING –] to select channel 0 (XM000).
6
Category search
CATEGORY SEARCH
XM040 DeepTrks
CAT: Rock
XM040 DeepTrks
Channel Category
• “LOADING” is displayed while receiving the channel or
information.
• “UPDATING” is displayed while updating encryption code.
• When the selected channel is not available, “XM– – –” is
displayed.
•Information on the artist name, song title, category and signal
level can be checked using
<
STATUS
>
.
• The XM Satellite Radio channels can be preset in the same way
as AM/FM band ( page 35).
3
Channel selection
XM040 DeepTrks
Song title/Artist name
Channel name
Channel number
Press [TUNING] to reach the desired channel.
The channel changes continuously when you press and hold
[TUNING].
When the artist name and song title are received, they are
displayed.
3
Either turn
<
FUNCTION
>
or press [TUNER] to
select “TUNER”.
Press [BAND] to select “XM”.
1
2
Press
FF GG
to select the category, and press
DD HH
to select the channel within the selected category.
2
Press
FF GG
in the XM mode.
• The current category name is displayed.
1
ConditionDisplay
NO
GOOD Signal strength is good
MARGINAL Signal strength is marginal
WEAK Signal strength is poor
Loss of the signal