Other Operations and
Functions
Other Operations
Playing Super Audio CD
1
īAssign the HDMI input connector at the āHDMI Inā
setting (vpage 34).
2
īEither turn <SOURCE SELECT> or press [SOURCE
SELECT] to select the input source assigned in step 1.
The ā ā indicator lights on the display.
3
īUse INPUT MODE to select āAUTOā (vpage 34).
Select the input mode according to the program source to be
played.
4
īSelect the surround mode (vpage 36, 37).
We recommend playing in the DIRECT mode.
5
īStart playing the Super Audio CD.
The ā ā indicator lights on the display.
For operating instructions, refer to the respective equipmentās
operating instructions.
⢠When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are ļ¬ rst converted
into PCM format, then into analog signals.
⢠āDSD DIRECTā is shown on the display when playing DSD 2-channel
signals in the DIRECT mode. āDSD MULTI DIRECTā is shown on
the display when playing DSD multi--channel signals in the DIRECT
mode.
Shufļ¬ ing playback
Press [CHANNEL +].
[Selectable items]
Albums
Songs
OFF
MENU : āInput Setupā ā āiPodā ā āShufļ¬ eā (vpage 35)
To switch between the Browse and Remote modes
Either press and hold [MODE].
⢠The title name, artist name and album name can be checked by
pressing <STATUS> during playback.
⢠On the AVR-988, folder and ļ¬ le names can be displayed as titles. Any
characters that cannot be displayed are replaced with ā . (period)ā.
⢠The time for which the menus are displayed can be set at menu
āManual Setupā ā āOption Setupā ā āOn-Screen Displayā ā āiPod
Informationā (vpage 31).
Viewing Still Pictures or Videos on the
iPod
Photo and video data on the iPod can be viewed on the monitor.
Only for iPod equipped with slideshow or video functions. (When
using an ASD-1R)
1
īPress and hold [MODE] to set the Remote mode.
āRemote iPodā is displayed on the AVR-988ās display.
2
īWatching the iPodās screen, use ui to select
āPhotosā or āVideosā.
3
īPress ENTER until the image you want to view is
displayed.
āTV Outā at the iPodās āSlideshow Settingsā or āVideo Settingsā must
be set to āOnā in order to display the iPodās photo data or videos on
the monitor. For details, see the iPodās operating instructions.
īī
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
1.AVR988EU_101_4th.indd 51 2007/09/13 11:32:42