EasyManuals Logo

Denon AVR-988 User Manual

Denon AVR-988
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
To cancel, press <ZONE2 / REC SELECT>, then turn <SOURCE SELECT>
until “ZONE2 SOURCE” is displayed.
Make a test recording before starting the actual recording.
Signals are only output to the analog REC OUT connectors when
the digital signals input to the digital input connectors (OPTICAL/
COAXIAL) are PCM (2-channel) signals.
Digital audio signals input to the HDMI connectors are not output
to the REC OUT connectors, so connect using the OPTICAL or
COAXIAL connectors.
Sources selected with the REC OUT mode are output from ZONE2
as well.
In the REC OUT mode, the remote control unit’s ZONE2 mode
buttons cannot be operated.
The “XM” digital audio output signals are not output from the
OPTICAL2 or OPTICAL3 output connectors.
NOTE
Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
Input sources for which “Delete is selected at “Source Delete
cannot be selected.
Recording on an External Device
(REC OUT mode)
You can listen to one program source while recording a different
program source.
1
Press <ZONE2 / REC SELECT>.
“ZONE2 SOURCE” is shown on the display.
ZONE2 SOURCE ZONE2 TUNER ZONE2 XM····
RECOUT XM RECOUT TUNER RECOUT SOURCE······
2
Turn <SOURCE SELECT> until “RECOUT SOURCE”
is displayed.
The ” indicator lights.
3
Turn <SOURCE SELECT> to choose the input source
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment’s
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
44).
5
Start recording.
For operating instructions, refer to the respective equipment’s
operating instructions.
<SOURCE SELECT>
<ZONE2 / REC SELECT>
<POWER> <QUICK SELECT>
<STANDARD>
<DSP SIMULATION>
CH SELECT
uiop
CH SELECT
uiop
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
uiop
1.AVR988EU_101_4th.indd 52 2007/09/13 11:32:44

Table of Contents

Other manuals for Denon AVR-988

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-988 and is the answer not in the manual?

Denon AVR-988 Specifications

General IconGeneral
BrandDenon
ModelAVR-988
CategoryReceiver
LanguageEnglish

Related product manuals