Denon AVR-988

Relationship Between Video Signals and Monitor Output
Video convert
Input signals MONITOR OUT
HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO
ON
A A A A A A A A
A A A S
VIDEO VIDEO VIDEO VIDEO
A A S A
S-VIDEO S-VIDEO S-VIDEO S-VIDEO
A A S S
S-VIDEO S-VIDEO S-VIDEO S-VIDEO
A S (1080p) A A A
COMPONENT
A A
A S (480p ~ 720p) A A
COMPONENT COMPONENT
A A
A S (480i / 576i) A A
COMPONENT COMPONENT COMPONENT COMPONENT
A S (1080p) A S
VIDEO COMPONENT
z
1 VIDEO VIDEO
A S (480p ~ 720p) A S
COMPONENT
z
1 COMPONENT
z
1
A
VIDEO
A S (480i / 576i) A S
COMPONENT
z
1 COMPONENT
z
1 COMPONENT VIDEO
A S (1080p) S A
S-VIDEO COMPONENT
z
2 S-VIDEO S-VIDEO
A S (480p ~ 720p) S A
COMPONENT
z
2 COMPONENT
z
2 S-VIDEO S-VIDEO
A S (480i / 576i) S A
COMPONENT
z
2 COMPONENT
z
2 S-VIDEO S-VIDEO
A S (1080p) S S
S-VIDEO COMPONENT
z
2 S-VIDEO S-VIDEO
A S (480p ~ 720p) S S
COMPONENT
z
2 COMPONENT
z
2 S-VIDEO S-VIDEO
A S (480i / 576i) S S
COMPONENT
z
2 COMPONENT
z
2 S-VIDEO S-VIDEO
S A A A
HDMI
A A A
S A A S
HDMI
z
1 VIDEO VIDEO VIDEO
S A S A
HDMI
z
2 S-VIDEO S-VIDEO S-VIDEO
S A S S
HDMI
z
2 S-VIDEO S-VIDEO S-VIDEO
S S (Other than 480i / 576i) A A
HDMI COMPONENT
A A
S S (480i / 576i) A A
HDMI COMPONENT COMPONENT COMPONENT
S S (1080p) A S
HDMI
z
1 COMPONENT
z
1 VIDEO VIDEO
S S (480p ~ 720p) A S
HDMI
z
1 COMPONENT
z
1
A
VIDEO
S S (480i / 576i) A S
HDMI
z
1 COMPONENT
z
1 COMPONENT VIDEO
S S (Other than 480i / 576i) S A
HDMI
z
2 COMPONENT
z
2 S-VIDEO S-VIDEO
S S (480i / 576i) S A
HDMI
z
2 COMPONENT
z
2 S-VIDEO S-VIDEO
S S (Other than 480i / 576i) S S
HDMI
z
2 COMPONENT
z
2 S-VIDEO S-VIDEO
S S (480i / 576i) S S
HDMI
z
2 COMPONENT
z
2 S-VIDEO S-VIDEO
S : Signal input
A : No signal
480p ~ 720p: 480p / 576p / 1080i / 720p
A : Not output
z
1 : On-screen display superimposed on video signal and output.
z
2 : On-screen display superimposed on S-Video signal and output.
COMPONENT or HDMI :
On-screen display only displayed for MENU.
• The main zone video conversion function is compatible with the following format: NTSC, PAL, SECAM, NTSC4.43, PAL-N, PAL-M and PAL-60.
• When SECAM signals of video input are up-converted, the signals are output in PAL format from the S-Video connector.
• When the input signal is a component 1080i or 720p signal, the signal upconverted to HDMI is output with that resolution or 1080p.
• When the input signal is a video, S-Video or component 480i, 480p, 576i or 576p signals, the signal up-converted to HDMI is output according to
the setting made at “Resolution” under “HDMI Setup” – “HDMI Video Setup” (vpage 28).
• Signals up-converted to HDMI are output to the HDMI monitor with the resolution at which they are input.

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
1.AVR988EU_101_4th.indd 69 2007/09/13 11:33:02