Denon AVR-991 User Manual

23
ENGLISH
Simple version Advanced version InformationBasic version
Playback (Basic operation)
n Playing a Blu-ray Disc player/DVD player
(vpage24)
n Playing a CD player (vpage24)
n Playing an iPod
®
(vpage24)
n Tuning in radio stations (vpage27)
n Playing a network audio (vpage31)
n Playing a USB memory device (vpage41)
Selecting a listening mode (Surround mode)
(vpage43)
n Selecting the input source (vpage23)
n Adjusting the master volume (vpage23)
n Turning off the sound temporarily (vpage24)
Playback (Advanced operation) (vpage52)
Important information
Before starting playback, make the connections between the different
components and the settings on the receiver.
NOTE
Also refer to the operating instructions of the connected components
when playing them.
Selecting the input source
Press the input source select button
(NET/USB, iPod, DVD, BD, TUNER,
DOCK, SAT TU, SAT/CBL, GAME,
V.AUX, PHONO, CD, DVR, TV) to be
played back.
The desired input source can be selected
directly.
• When iPod PLAY is pressed, the input source of this unit is
switched to “DOCK” or “NET/USB” and the connected iPod is
automatically played (vpage27 “iPod play function”).
You can also use the following operation to select an input
source.
n Using the “Source Select” menu
q Press SOURCE SELECT.
Display the “Source Select” menu.
Source Select :Flickr
Recent Source
Enter
Select
ENTER
The currently selected input
source is highlighted.
q
w
e
q Input Source
The name of the highlighted input source is displayed.
w Recently used sources
The recently used input sources (up to five) are displayed.
e Icons for the input sources in the different categories are
displayed.
w Use uio p to select the input source,
then press ENTER.
The input source is set and the source
selection menu is turned off.
• When using with an iPod connected directly to the USB port of this
unit, select “ (USB/iPod)” for the input source.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” (vpage84).
• To turn off the source selection menu without selecting an input
source, press SOURCE SELECT again.
n Using the knob on the main unit
Turn SOURCE SELECT.
• Turning SOURCE SELECT switches the
input source, as shown below.
BD DVD TV SAT/CBL GAMEDVR V.AUX
PHONO TUNER SIRIUS NET/USB DOCKCD
Adjusting the master volume
Use VOL df to adjust the volume.
n When the “Volume Display” setting
(vpage84) is “Relative”
GAdjustable rangeH
– – –
–80.5dB – 18.0dB
n When the “Volume Display” setting (vpage84) is
“Absolute”
GAdjustable rangeH
0.0 – 99.0
• The variable range differs according to the input signal and channel
level setting.
You can also operate via the main unit.
In this case, perform the following
operations.
Turn MASTER VOLUME to adjust the
volume.

Denon AVR-991 Specifications

General

Brand	Denon
Model	AVR-991
Category	Stereo Receiver
Language	English