Pre Amplifier:
0
All of the speakers are connected using
an external power amplifier and this unit
is used as an integrated amplifier.
0
You can connect speakers for up to 15.1-
channels for MAIN ZONE.
The pre-out output automatically switches
for playing back up to 13.1-channels in
accordance with the input signals and
sound mode when 15.1-channel speakers
are installed.
Custom:
0
The internal amplifier of this unit is
assigned as desired.
0
You can connect speakers for up to 13.1-
channels for MAIN ZONE.
Set the channel to be assigned to the
speaker terminal in “Settings”. (v p. 241)
o
Speakers for ZONE2 / Speakers for ZONE3 /
Speakers for ZONE2/3 / Speakers for Bi-Amp /
Speakers for 2ch / Speakers for Front B
When “Assign Mode” is set to “11.1ch + ZONE2”, “11.1ch + ZONE3”,
“11.1ch + ZONE2/3-MONO”, “9.1ch + ZONE2/3”, “11.1ch (Bi-Amp)” or
“11.1ch + Front B” in the menu, select the speaker terminal from which
to output the channels to which the internal amplifier is assigned.
(v p. 232)
HEIGHT 2:
The assigned channels are output from
the HEIGHT2 speaker terminals. Up to
one set of height, ceiling, and Dolby
Atmos Enabled channels can be used.
HEIGHT 3:
The assigned channels are output from
the HEIGHT3 speaker terminals.
SURROUND BACK:
The assigned channels are output from
the SURROUND BACK speaker
terminals. The surround back channel
cannot be used.
Contents Connections Playback Settings Tips Appendix
234
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
