Denon AVR-S510BT User Manual

Calling up the settings
1
Press QUICK SELECT.
The Quick Select settings registered to the button you pressed are
called up.
0
The default settings for the input source and volume are as shown
below.
Button Input source Volume
QUICK SELECT 1 CBL/SAT 40
QUICK SELECT 2 DVD/Blu-ray 40
QUICK SELECT 3 Game 40
QUICK SELECT 4 Bluetooth 40
Changing the settings
1
Set the items below to the settings you want to
register.
A
Input source
(v
p. 37)
B
Volume (v
p. 38)
C
Sound mode (v p. 55)
D
Video Select settings (v p. 54)
2
Press and hold the desired QUICK SELECT until
“Quickz
Memory” appears on the display.
The current settings will be memorized.
z is displayed the number for the QUICK SELECT button you
pressed.
Contents Connections Playback Settings Tips Appendix
63
Front panel Display Rear panel Remote Index

Denon AVR-S510BT Specifications

General

Channels	5.2
Power Output	70 Watts per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Frequency Response	10 Hz - 100 kHz
Response Bandwidth	10 Hz - 100 kHz
Total Harmonic Distortion	0.08%
Signal-To-Noise Ratio	98 dB
HDMI Inputs	5
HDMI Outputs	1
HDMI Pass-Through	Yes
HDMI Version	2.0
HDCP Version	2.2
Bluetooth	Yes
4K Ultra HD Pass-through	Yes
Audio Decoding	Dolby TrueHD, DTS-HD Master Audio
Wi-Fi	No
Inputs	5 HDMI, 2 digital optical, 2 analog
Outputs	1 HDMI
Dimensions	17.1 in x 12.6 in x 5.9 in
Amplifier Output Details	5 channels