Denon AVR-S510BT User Manual

Pass Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last:
The most recently used input source will go
into standby mode.
CBL/SAT /
DVD/Blu-ray /
Game / Media Player
(Default : CBL/SAT):
Pass through the selected input source.
0
“Pass Source” can be set when “HDMI PassThrough” is set to “On”.
Contents Connections Playback Settings Tips Appendix
75
Front panel Display Rear panel Remote Index

Denon AVR-S510BT Specifications

General

Channels	5.2
Power Output	70 Watts per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Frequency Response	10 Hz - 100 kHz
Response Bandwidth	10 Hz - 100 kHz
Total Harmonic Distortion	0.08%
Signal-To-Noise Ratio	98 dB
HDMI Inputs	5
HDMI Outputs	1
HDMI Pass-Through	Yes
HDMI Version	2.0
HDCP Version	2.2
Bluetooth	Yes
4K Ultra HD Pass-through	Yes
Audio Decoding	Dolby TrueHD, DTS-HD Master Audio
Wi-Fi	No
Inputs	5 HDMI, 2 digital optical, 2 analog
Outputs	1 HDMI
Dimensions	17.1 in x 12.6 in x 5.9 in
Amplifier Output Details	5 channels