Denon AVR-S510BT User Manual

o
Contents
Tips
I want the volume not to become too loud by mistake 93
I want to keep the volume at the same level when I turn the power on 93
I want to have the subwoofer always output audio 93
I want to set the optimized listening environment after changing the
configuration/position of the speakers or changing a speaker to a new
one 93
I want to combine a desired video with the current music 93
Troubleshooting
Power does not turn on / Power is turned off 95
Operations cannot be performed through the remote control unit 96
Display on this unit shows nothing 96
No sound comes out 97
Desired sound does not come out 98
Sound is interrupted or noise occurs 100
No video is shown on the TV 101
The menu screen is not displayed on the TV 102
USB memory devices cannot be played back 103
File names on the USB memory device are not displayed properly 104
Bluetooth cannot be played back 104
Contents Connections Playback Settings Tips Appendix
Tips
92
Front panel Display Rear panel Remote Index

Denon AVR-S510BT Specifications

General

Channels	5.2
Power Output	70 Watts per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Frequency Response	10 Hz - 100 kHz
Response Bandwidth	10 Hz - 100 kHz
Total Harmonic Distortion	0.08%
Signal-To-Noise Ratio	98 dB
HDMI Inputs	5
HDMI Outputs	1
HDMI Pass-Through	Yes
HDMI Version	2.0
HDCP Version	2.2
Bluetooth	Yes
4K Ultra HD Pass-through	Yes
Audio Decoding	Dolby TrueHD, DTS-HD Master Audio
Wi-Fi	No
Inputs	5 HDMI, 2 digital optical, 2 analog
Outputs	1 HDMI
Dimensions	17.1 in x 12.6 in x 5.9 in
Amplifier Output Details	5 channels