Denon AVR-S510BT User Manual

Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Surr.Parameter Adjusts surround sound parameters. 68
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
71
Audio Delay Compensates for incorrect timing between video and audio.
72
Volume Make volume settings. 72
Room EQ Set whether to use the equalizer or not. 73
.
Video
HDMI Audio Out Select HDMI audio output device. 74
HDMI PassThrough Selects how this unit will pass HDMI signals to the HDMI output in standby power mode. 74
Pass Source Sets the HDMI connector that inputs HDMI signals when in standby. 75
Contents Connections Playback Settings Tips Appendix
Settings
64
Front panel Display Rear panel Remote Index

Denon AVR-S510BT Specifications

General

Channels	5.2
Power Output	70 Watts per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Frequency Response	10 Hz - 100 kHz
Response Bandwidth	10 Hz - 100 kHz
Total Harmonic Distortion	0.08%
Signal-To-Noise Ratio	98 dB
HDMI Inputs	5
HDMI Outputs	1
HDMI Pass-Through	Yes
HDMI Version	2.0
HDCP Version	2.2
Bluetooth	Yes
4K Ultra HD Pass-through	Yes
Audio Decoding	Dolby TrueHD, DTS-HD Master Audio
Wi-Fi	No
Inputs	5 HDMI, 2 digital optical, 2 analog
Outputs	1 HDMI
Dimensions	17.1 in x 12.6 in x 5.9 in
Amplifier Output Details	5 channels