Denon AVR-S570BT User Manual

Sound modes and surround parameters
Restorer
z3
z1
z2
SSz4
S
Stereo
SSS
S
SS
Multi Ch In
S S
Dolby Pro Logic g SS SSS SS
DTS Neo:6
SS SSS
Dolby Digital
SS S
Dolby Digital Plus
SS S
Dolby TrueHD
SS
DTS Surround
SS S
DTS-HD
SS
Multi Ch Stereo
SS SS
Virtual
SS SS
Subwoofer
Direct/Pure Direct (2-channel)
Direct/Pure Direct (Multi-channel)
Sound mode
Surround Parameter
Dynamic
Compression
Low Frequency
Eects
Tone
Pro Logic g Music mode only
Neo:6 Music
mode only
Panorama Dimension Center Width Center Image
Mode
z1
This item can be selected when Dolby Digital or DTS signal is played.
z2
This item can be selected when Dolby Digital or DTS signal or DVD-Audio is played.
z3
This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z4 This setting is available when “Subwoofer Output” in the menu is set to “LFE+Main”. (v p. 97)
Contents
Connections Playback Settings Tips Appendix
132
Front panel Display Rear panel Remote Index

Denon AVR-S570BT Specifications

General

Channels	5.2
Power Output	70W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Outputs	1
4K/60Hz Pass-through	Yes
Bluetooth	Yes
Dolby Vision	Yes
HDR10	Yes
HDCP 2.3 Support	Yes
HDMI 2.1	No
4K/120Hz pass-through	No
HDR Support	Yes
eARC	Yes
Dolby Technologies	Dolby TrueHD, Dolby Digital Plus
DTS Technologies	DTS-HD Master Audio
Frequency Response	10Hz-100kHz
Total Harmonic Distortion	0.08%
Signal-to-Noise Ratio	98dB
Supported Audio Formats	MP3, WMA, AAC, FLAC, ALAC, WAV
Input Sensitivity/Impedance	200 mV / 47 kΩ
Dimensions (W x H x D)	434 x 151 x 319 mm
Weight	7.5 kg