Denon AVR-S570BT User Manual

Sound modes and channel output
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Layout”. (v p. 94)
S Dz
SDDD
Stereo
S D
Multi Ch In
SDDD
Dolby Pro Logic g SDDD
DTS Neo:6
SDDD
Dolby Digital
SDDD
Dolby Digital Plus
SDDD
Dolby TrueHD
SDDD
DTS Surround
SDDD
DTS-HD
SDDD
Multi Ch Stereo
SDDD
Virtual
S D
Direct/Pure Direct (2-channel)
Direct/Pure Direct (Multi-channel)
Sound mode
Front L/R Center Surround L/R Subwoofer
Channel output
z Audio is output when “Subwoofer Output” in the menu is set to “LFE+Main”. (v p. 97)
Contents
Connections Playback Settings Tips Appendix
131
Front panel Display Rear panel Remote Index

Denon AVR-S570BT Specifications

General

Channels	5.2
Power Output	70W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Outputs	1
4K/60Hz Pass-through	Yes
Bluetooth	Yes
Dolby Vision	Yes
HDR10	Yes
HDCP 2.3 Support	Yes
HDMI 2.1	No
4K/120Hz pass-through	No
HDR Support	Yes
eARC	Yes
Dolby Technologies	Dolby TrueHD, Dolby Digital Plus
DTS Technologies	DTS-HD Master Audio
Frequency Response	10Hz-100kHz
Total Harmonic Distortion	0.08%
Signal-to-Noise Ratio	98dB
Supported Audio Formats	MP3, WMA, AAC, FLAC, ALAC, WAV
Input Sensitivity/Impedance	200 mV / 47 kΩ
Dimensions (W x H x D)	434 x 151 x 319 mm
Weight	7.5 kg