o
Dynamic Compression
Compress dynamic range (difference between loud and soft sounds).
Auto:
Automatic dynamic range compression
on/off control according to source.
Low / Medium / High: These set the compression level.
Off: Dynamic range compression is always off.
0
“Auto” can only be set when Dolby TrueHD signals are input.
0
The default setting is “Off”. When the input signal is Dolby TrueHD source, the
default setting is “Auto”.
o
Low Frequency Effects
Adjust the low frequency effects level (LFE).
-10 dB – 0 dB (Default : 0 dB)
For proper playback of the different sources, we recommend setting to the
values below.
0
Dolby Digital sources : 0 dB
0
DTS movie sources : 0 dB
0
DTS music sources: -10 dB
o
Center Gain
Distributes the dialogue output from the center channel to the front left
and right channels and widens the sound image in the front.
0.0 – 1.0
0
You can set this when the sound mode is set to DTS Neo:X.
0
The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
o
Panorama
The front sound field is expanded further towards the back to create a
seamlessly inclusive sound impression.
On:
Use “Panorama”.
Off
(Default):
Do not use “Panorama”.
You can set this when the sound mode is Dolby PLg/gx in the “Music” mode.
Contents Connections Playback Settings Tips Appendix
154
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
