Denon AVR-X3100W User Manual

0
This unit is compatible with Audyssey DSX
®
(v p. 255), Dolby Pro Logic gz
(v p. 257) and DTS Neo:X (v p. 258) which offers an even wider and
deeper surround sensation.
When using Audyssey DSX
®
, install front wide speakers or front height speakers.
When using Dolby Pro Logic gz, install front height speakers.
0
Use the illustration below as a guide for how high each speaker should be
installed. The height does not need to be exactly the same.
.
z1
z2
45˚
z2 Recommended for Audyssey DSX
®
z1 Recommended for Dolby Pro Logic gz
Point slightly
downwards
Surround
speaker
Front height
speaker
Point slightly
downwards
At least 3.3 ft / 1 m
Front
speaker
Front wide
speaker
GViewed from the sideH
2 – 3 ft /
60 – 90 cm
Surround back
speaker
Contents
Connections Playback Settings Tips Appendix
26
Front panel Display Rear panel Remote Index

Denon AVR-X3100W Specifications

General

Receiver type	Surround
Speaker selector	A+B
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	8
Remote control in	1
Composite video in	3
Multichannel audio input type	Terminals
Component video (YPbPr/YCbCr) in	2
12V trigger	Yes
Speakers connectivity type	-
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Supported radio bands	FM
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	Not supported
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W

Weight and Dimensions

Depth	388 mm
Width	434 mm
Height	167 mm
Weight	10700 g