Adjusting the picture quality for your
viewing environment (Picture Mode)
n
Supported input sources :
CBL/SAT / DVD / Blu-ray / Game / AUX1 /
AUX2 / Media Player / CD
z
/ TV Audio
z
z
You can set the picture mode when an HDMI, component video or video
connector is assigned.
1
Press OPTION.
An option menu screen is displayed.
2
Use ui to select “Picture Mode”, then press ENTER.
The “Picture Mode” screen is displayed.
3
Use o p to select the picture mode.
Off
(Default):
No picture quality adjustment is done
with this unit.
Standard:
The standard mode suited for most
living room viewing environments.
Movie:
A mode suited for watching movies in a
dark room such as a theater room.
Vivid:
A mode that makes graphic images for
games, etc. brighter and more vivid.
Streaming:
A mode suited for low bit rate video
sources.
ISF Day:
A mode suited for watching movies in a
bright room during the day.
ISF Night:
A mode suited for watching movies in a
dark room at night.
Custom: Adjusts the picture quality manually.
4
Press ENTER.
0
“Picture Mode” settings are stored for each input source.
Contents Connections Playback Settings Tips Appendix
138
Front panel Display Rear panel Remote Index
To Next Page
Loading...
