Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Subwoofer Level Adjust Adjusts the subwoofer channel volume for all input sources. 177
Bass Sync Adjusts the phase shift when there is a delay in the bass (LFE) recorded on a disc. 177
Surround Parameter Adjusts surround sound parameters. 178
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
183
Audio Delay Compensates for incorrect timing between video and audio. 184
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 185
Audyssey
Makes Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
, Audyssey Dynamic
Volume
®
and Audyssey LFC
TM
settings.
186
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 189
.
Video
Picture Adjust Adjusts picture quality. 191
HDMI Setup Makes settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings. 193
Output Settings Makes settings for video output. 198
Component Video Out Sets whether to use the component video output connector for MAIN ZONE or ZONE2. 202
On Screen Display Configures the on-screen display settings. 202
4K Signal Format Set the 4K signal format when the TV or playback device is 4K compatible. 203
TV Format Sets the video signal format to be output for the TV you are using. 205
Contents Connections Playback Settings Tips Appendix
172
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
