o
Power Saving
If “TV Speaker” is set as the audio output setting of your TV, this unit is
automatically set to standby mode to reduce power consumption.
This function is activated in the following cases.
0
When “TV Audio” is selected as the input source of this unit
0
When playing content from a device connected by HDMI
On: Use Power Saving function.
Off
(Default):
Do not use Power Saving function.
0
“Power Saving” can be set when “HDMI Control” is set to “On”. (v p. 195)
o
Smart Menu
This function can be used to configure the settings of this unit, select
an input source and set Tuner and Internet Radio stations using the TV
remote control.
On: Use Smart Menu function.
Off: Do not use Smart Menu function.
0
“Smart Menu” can be set when “HDMI Control” is set to “On”. (v p. 195)
NOTE
0
If the “Smart Menu” settings have been changed, always reset the power to
connected devices after the change.
0
The Smart Menu function may not work properly depending on the
specifications of your TV. In this case, set “Smart Menu” to “Off”.
Contents
Connections Playback Settings Tips Appendix
197
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
