o
Resolution
Set the output resolution. You can set “Resolution” separately for
HDMI output of the analog video input and HDMI input.
Auto
(Default):
The resolution supported by the TV
connected to the HDMI MONITOR OUT
connector is detected automatically and
the appropriate output resolution is set.
480p/576p / 1080i /
720p / 1080p /
1080p:24Hz /
4K / 4K (60/50) :
Set the output resolution.
0
When “i/p Scaler” is set to “Analog & HDMI”, the resolution of both the analog
video input signal and HDMI input signal can be set. (v
p. 199)
0
When set to “1080p:24Hz”, you can enjoy film-like pictures for film sources (in
24 Hz). For video sources and mixed sources, we recommend setting the
resolution to “1080p”.
0
It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output at a
resolution of 1080p/50Hz.
o
Sharpness
Enables the sharpness feature which enhances the edges of images
when up-scaling video to 4K.
On:
Enables the video enhancer sharpness
feature to provide image edge contouring
which is optimized for converting lower
resolution standard definition video to 4K.
Off
(Default):
Disables the video enhancer sharpness
feature.
0
This item can be set when “i/p Scaler” is set to anything other than “Off”.
(v
p. 199)
0
We recommend using this sharpness feature only when your TV sharpness is
set to 0.
Contents
Connections Playback Settings Tips Appendix
200
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
