To Next PageTo Next PageWhat to do if my Denon DBP-1610 disc cannot be played back?
Clean the disc and ensure the disc label is facing up. Check if the disc is defective by trying another disc. You may need to cancel the ratings control or change the control level. Also, ensure you insert a disc that can be played back on this unit.
What to do if my Denon DBP-1610 has no sound or distorted sound?
Adjust the volume, check that the speakers are connected correctly, and check the HDMI connections. Also, check the “Audio” settings.
Why does my Denon DBP-1610 Blu-ray Player not return to the start-up screen when disc is removed?
Reset this unit by turning it off, then on again.
Why doesn't angle switch on my Denon DBP-1610?
The angle cannot be switched for BD/DVD which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes.
Why does my Denon DBP-1610 Blu-ray Player not respond to some operating commands during playback?
Operations may not be permitted by the disc. Refer to the instructions of the disc.
What to do if my Denon DBP-1610 Blu-ray Player cannot connect to the network while my PC is connected?
Check the content of your Internet service contract to see if your Internet Service Provider prevents multiple terminals connecting at the same time.
General| HDMI | Yes |
|---|---|
| Weight | 4100 g |
| Dimensions (WxDxH) | 435 x 310 x 106 mm |
| Composite video out | 1 |
| Disc types supported | BD, BD-R, BD-Re |
| Audio formats supported | MP3, WMA |
