Denon DBT-1713UD User Manual (English)

Other manuals for Denon DBT-1713UD

Owner's Manual77 pages

Specification2 pages

Getting Started10 pages

Questions and Answers:

H
Haley Phillips DVMSep 14, 2025
Why Denon Blu-ray Player can't display data stored in a USB memory device?
- J
  James CarpenterSep 14, 2025
  If data stored in a USB memory device cannot be displayed (read) on your Denon Blu-ray Player: * Check if the unit has initialized the USB memory device with applicable formats (FAT 16/FAT 32). * If using a USB hub or extension cable, directly connect the USB memory device to a USB port on the front panel of the unit. * Ensure the USB memory device contents are applicable to this unit. * Note that when a USB memory device of 192 MB or less is formatted with FAT 32, this unit may not be able to read it. * This unit does not support a USB memory device containing encrypted data.
C
Carol BlackAug 25, 2025
Why is there no sound from my Denon Blu-ray Player?
- M
  Michelle HarrisAug 25, 2025
  If you are experiencing no sound from your Denon Blu-ray Player, it could be due to several reasons: * If the unit is in reverse play, fast forward, fast reverse, slow forward, slow reverse, or pause mode, return to normal playback. * If the HDMI OUT connector is connected to a DVI IN connector of equipment, note that DVI connection does not support HDCP, which is necessary for correct audio output. * Check if the Pure Direct function is set to “Pure Direct 1” or “Pure direct 2” and set it to “Off”.
R
richarddavisAug 25, 2025
What to do if video and audio are not output via the HDMI connection on Denon Blu-ray Player?
- K
  Kayla GriffinAug 26, 2025
  If video and audio are not output via the HDMI connection on your Denon Blu-ray Player, consider the following: * Check the HDMI cable connection. * Ensure the “HDMI” indicator is lit on the unit's display. * Confirm that the connected display device supports HDCP. * Verify the HDMI video resolution setting supports the resolution of the connected device. * Try turning off the power to both the unit and the connected device, then turn them back on. * Unplug and then replug the HDMI cable. * If connected to an AV receiver, connect the unit directly to a television to check the video and audio output.
D
Dustin FaulknerAug 26, 2025
How to fix Denon Blu-ray Player when power does not turn on?
- E
  ebowenAug 27, 2025
  If the power does not turn on for your Denon Blu-ray Player, check these items: * Ensure the power cord is properly connected. * Plug the power supply cord into the household power outlet. * The safety protection device may be activated. Unplug the power cord once, wait for 5-10 seconds, and then plug it in again.
K
Karen RogersAug 27, 2025
What to do if my Denon Blu-ray Player freezes during playback?
- J
  Joseph RodriguezAug 27, 2025
  If the picture on your Denon Blu-ray Player freezes momentarily during playback, it could be due to: * A scratched or contaminated disc. Clean the disc or replace it with a non-scratched disc. * A problem with the data recorded on the disc.
A
Allison AndersonSep 13, 2025
Why Denon Blu-ray Player not reading USB memory device?
- J
  Joseph WrightSep 13, 2025
  If a USB memory device cannot be read by your Denon Blu-ray Player, the format of the USB memory device may not match this unit, or the USB memory device may not be compatible.
D
Dale BowmanSep 12, 2025
Why my Denon Blu-ray Player can't read a playable disc?
- M
  Miguel RomeroSep 12, 2025
  If your Denon Blu-ray Player cannot read a playable disc, the pickup lens may be dirty. Before requesting servicing, try cleaning the laser pickup with a commercially available lens cleaner.
N
nicole52Sep 12, 2025
Why my Denon Blu-ray Player can't play a disc back?
- T
  Teresa WatsonSep 12, 2025
  If a disc cannot be played back on your Denon Blu-ray Player, the finalizing procedure after recording may not have been performed correctly. Finalize the disc properly.
S
sbassSep 4, 2025
Why does my Denon Blu-ray Player not return to start-up screen?
- E
  Eric PerezSep 4, 2025
  If your Denon Blu-ray Player does not return to the start-up screen when a disc is removed, there may be an internal error. Try setting the power to standby, waiting a while, and then turning the power back on.
A
Adam McdanielSep 1, 2025
How to fix no sound or hard to hear sound on Denon Blu-ray Player?
- T
  Trevor MoralesSep 2, 2025
  If you experience no sound or the sound is hard to hear on your Denon Blu-ray Player, check these: * Verify the audio connections of connected devices and speakers. * Ensure the connected audio devices are powered on. * Confirm the input selection is set to the input to which the unit is connected. * Check that the audio output is properly selected.

Denon DBT-1713UD Specifications

General

3D	Yes
Depth	295 mm
Width	434 mm
Height	108 mm
Weight	4900 g
Device type	Blu-Ray player
Product color	Black
Audio decoders	-
Cables included	AC
AC input voltage	120 V
AC input frequency	60 Hz
Disc types supported	BD, BD-R, BD-RE, CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW
Dynamic range (1kHz)	100 dB
Playback disc formats	Blu-Ray video, CD audio
Supported video modes	1080p
Card reader integrated	No
USB 2.0 ports quantity	1
Digital audio optical out	0
Analog signal format system	NTSC, PAL
Power consumption (standby)	0.5 W
Power consumption (typical)	20 W
Signal-to-Noise Ratio (SNR)	115 dB
Audio output channels	2.0 channels
Total Harmonic Distortion (THD)	0.0025 %