To Next PageTo Next PageHow to reset rating level password on Denon DBP-2012UD Media Player?
If you've forgotten the password for the rating level on your Denon Media Player, perform the “System” – “Initialize” procedure in the GUI menu.
What to do if Denon Media Player buttons do not work?
If the buttons on your Denon Media Player aren't working or the unit stops responding, it could be due to disc restrictions. Consult the disc's instructions for permitted operations. Alternatively, the safety protection device might be activated. Try unplugging the power cord, waiting 5-10 seconds, and then plugging it back in.
Why no picture appears on my Denon Media Player?
If your Denon Media Player isn't displaying a picture, first, switch your TV's input to the external input connected to the player. Also, ensure that the Pure Direct function is set to “Off”. Check the connection of the video/component video cable, and verify that the resolution setting on the player matches your connected device's resolution. Ensure the video cable is securely connected. Note that connecting the HDMI OUT connector to a DVI IN connector may cause issues due to HDCP incompatibility.
What to do if playback does not start when a title is selected on Denon Media Player?
If playback doesn't start when you select a title on your Denon Media Player, it might be due to viewing restriction settings. Check the “Ratings” setting in the GUI menu.
Why does my Denon DBP-2012UD Media Player not start playback?
If playback on your Denon Media Player doesn't start when you press play, or it starts and stops immediately, there might be condensation inside the player or on the disc. Let it sit for 1 to 2 hours with the power off. Also, check the disc for scratches or fingerprints; clean the disc or replace it. Ensure the disc is loaded correctly, face down. Finally, confirm that the disc is playable and properly inserted.
Why does the picture freeze momentarily during playback on my Denon DBP-2012UD?
If the picture freezes momentarily during playback on your Denon Media Player, it could be due to a scratched or dirty disc. Clean the disc or replace it with a non-scratched one. Alternatively, there may be an issue with the data recorded on the disc.
How to turn on subtitles on Denon Media Player?
If subtitles are not displayed on your Denon Media Player, it may be because the BD-Video, DVD-Video, or DivX® files do not contain subtitles. Use the disc menu or the SUBTITLE button to set the subtitles to display if they are available.
Why is the picture not displayed correctly on my Denon DBP-2012UD?
The picture on your Denon Media Player may be slightly disturbed right after fast-forwarding or reversing; this is normal. Ensure the unit’s video/component video output is connected directly to the TV or via the AV receiver, not through a VCR. The issue could also be due to an incompatible disc or one with a different region number. This player supports region code “B” for BD-Video discs and “2” or “ALL” for DVD-Video discs.
How to fix a Denon DBP-2012UD that does not turn on?
General| 3D | Yes |
|---|---|
| Depth | 319 mm |
| Width | 434 mm |
| Height | 107 mm |
| Weight | 5200 g |
| Device type | Blu-Ray player |
| HDMI version | 1.4a |
| Product color | Silver |
| Audio decoders | Dolby Digital Plus, Dolby TrueHD, DTS-HD, DTS-HD Master Audio |
| LED indicators | Power |
| Internal memory | 1024 MB |
| AC input voltage | 110-240 V |
| AC input frequency | 50 - 60 Hz |
| Playback disc types | CD-R, CD-RW, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Disc types supported | BD-R, BD-RE, CD-R, CD-RW, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Dynamic range (1kHz) | 110 dB |
| Playback disc formats | Blu-Ray video, CD audio, DVD-Audio, DVD-Video, SACD |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Card reader integrated | No |
| USB 2.0 ports quantity | 1 |
| Audio formats supported | AAC, LPCM, MP3, WMA |
| Image formats supported | JPG |
| Video formats supported | AVCHD, AVI, DIVX, MPEG1, MPEG2, MPEG4, WMV9 |
| Digital audio optical out | 0 |
| Analog signal format system | NTSC, PAL |
| Power consumption (standby) | 0.5 W |
| Signal-to-Noise Ratio (SNR) | 125 dB |
| Network streaming services supported | YouTube |
| Audio output channels | 7.1 channels |
| Total Harmonic Distortion (THD) | 0.0008 % |
| Connector contacts plating | Gold |
| Disc playback modes | Programming |
| Multiplayer mode type | Offline, Online |
General precautions for operating the unit and handling connected cables and components.
Specific safety guidelines and precautions for viewing 3D video content.
List of included accessories supplied with the DENON product.
Information on how to use the manual and its symbols.
Key functionalities and technologies of the DENON DBP-2012UD universal player.
Overview of the four main steps: Connect, Turn on power, Set up audio, Play back disc.
Instructions for connecting the unit to various audio and video devices.
Procedures for basic playback operations for various media types.
Operations for configuring essential settings like display brightness and audio output.
Steps for connecting USB memory devices and networks for media playback.
Playing files from USB memory devices, DLNA servers, and YouTube.
Accessing and configuring various system, video, audio, and network settings.
Identification and explanation of front and rear panel buttons, displays, and indicators.
Information on playable discs, USB memory devices, and file format compatibility.
Solutions for common problems encountered during operation or playback.
