Denon DBP-2012UD - Setup Steps Overview

Simple
version
4
ENGLISH
Simple version (Simple setup guide)
This section briefly describes the procedures from connecting this unit and a television or AV receiver, using an HDMI cable, to start
playback after unpacking.
n Before connecting the unit, turn off the power to all devices.
n For operation of the connected devices, refer to the user manuals for each device.
Play back disc
(vpage8)
Enjoy Blu-ray Disc and DVD.
4
Set up the
audio
(vpage7)
Press MODE to set up audio.
3
Turn on power
(vpage6)
2
Connect
(vpage5)
Connect this unit and a television
or an AV receiver using an HDMI
cable.
1