Denon DCD-620 - Advanced CD Playback

Precautions:
e
Ifno
disc
has
been
loaded
or
the
disc
has
been
placed
upside
down,
all
indicators
will
light.
e
When
the
information
on
the
disc
cannot
be
read
correctly,
for
example
due
to
dust
or
dirt
on
the
disc,
the
indicators
will
read
as
shown
below.
Nothing
will
be
shown
on
the
TRACK
NO.
and
TIME
displays,
and
it
may
take
quite
a
while
to
read
the
disc.
e@
When
PLAY,
PAUSE
or
NUMBER
buttons
are
pushed
just
after
turning
on
the
unit
with
a
disc
inserted,
the
“M
S” display
might
not
be
indicated
in
the
window.
This
is
normal.
In this case, push the STOP button to light-up the display and then,
push your necessary function button.
Norma! display
ADVANCED CD PLAYBACK
C1) Playing a Specific Track Direct Search .............20000
e@ Use the number buttons and the +10 button to input the number of the
desired track.
For example, to play track number 4, press [4] , and to play track number
12, press and [2]. Playback will begin from that track.
@ Advancing to the next track
during playback ..........scsssssessssneneenensseesencesenens
Press the Automatic search forward button { PPE) during playback.
@ The pickup will advance to the beginning of the next track and playback
will continue. Pressing the button several times will forward the pickup
the corresponding number tracks.
8 Returning to the beginning of the
current track during playback .................sccesee
Press
the
Automatic
search
reverse
button
(
Ké@
)
during
playback.
@ The pickup will return to the beginning of the current track and playback
will
continue.
Pressing
the
button
several
times
will
return
the
pickup
the corresponding number tracks.
(4) Playing Specific Tracks in a
Specific Order ..........csscssscsssscessscssessesvsrerssnesarenseees Programmed Play
e With this function, you can choose any of the tracks on the disc and
program them to play in any order.
e Programming is possible with the disc holder open.
Up to 20 tracks can be programmed.
e The programmed tracks are shown on the calendar.
(1) Programming
(Number buttons)
(PROG/ DIRECT)
e Press the PROG/DIRECT button so that the indicator lights,
then use the number buttons and the +10 button to program the tracks.
For example, to program tracks 3, 12, and 7, press Bl,
C410], (2), and [7].
The corresponding track number lights on the calendar each time a
track is programmed, the track number is displayed on the TRACK NO.
display, and the total playing time of the programmed tracks is
displayed on the TIME display. A few seconds after the last track has
been programmed, the total number of tracks programmed is display-
ed on the TRACK NO. dispiay and the total playing time of the
programmed tracks is displayed on the TIME display.
{2) Checking the Programmed Tracks
(CALL)
e Press the CALL button.
The programmed tracks are displayed in order on the TRACK NO.
display each time the CALL button is pressed.
{3) Playing the Programmed Tracks
e Press the ( ® PLAY) button to play the tracks in the programmed order.