Denon DCD-710AE - 3.3 Automatic Mounting Mode; 3.4 Error Display and Codes


ENGLISH
Getting Started Connections Troubleshooting Specications
n
Switching the Display
During playback, press [TIME/DISPLAY].
b The characters that can be displayed are as follows:
A ~ Z a ~ z 0 ~ 9
! ” # $ %
&
: ; < > ? @
l
[ ] _ ` | { }  ^ ’ ( ) * + , - . / = (space)
File name
NOTE
• DENON will take no responsibility whatsoever for any loss or damage
to data on USB memory devices when using the USB memory
device connected to the DCD-710AE.
• USB memory devices will not work via a USB hub.
• DENON does not guarantee that all USB memory devices will
operate or be suppled power. When using a USB connection type
portable hard disk of the type for which power can be supplied by
connecting an AC adapter, we recommend using the AC adapter.
Playing USB Memory device
DCD-710AE
Timer device
Using the Timer Play Function
1
Turn on the power of the connected components.
2
Switch the amplier’s function to input from the
connected main unit.
3
Load a disc or connect the USB memory device or
iPod.
4
Set the audio timer for the desired times.

b Refer also to the owner’s manual of the audio timer.
5
Turn the timer “ON”.
The power of the components connected to the timer turns
off.
b When the set time is reached, the power of the different
components automatically turns on and playback starts from the
rst track.
Amplifier
AC outlet (Wall)
n To Switch the Folder or File During Playback
• Folder
Use [FOLDER +, -] to select the folder, then press [ENTER].
• File
Use [o, p] to select the le, then press [ENTER].
Use 8, 9 to select the le, or use [NUMBER] (0 ~ 9, +10)
to select the le number.
b The file numbers are set automatically when the USB memory
device is loaded.
n Stopping Playback
Press 2.
n Stopping Playback Temporarily
Press <1/3> or [3].
The “3” is displayed.
b To resume playback, press <1/3> or [1].
n Fast-Forwarding and Fast-Reversing (searching)
During playback, press and hold in [6, 7].
n
Playing Repeatedly
Press [REPEAT].
n
Playing Random Order
In the stop mode, press [RANDOM].
1
Playback preparation (“Before Playing USB or iPod”
vpage 7).
2
Press [FOLDER MODE] and select “Folder Mode” or
“Memory Mode”.
GAbout the displayH
When “Folder Mode” is selected ∙∙∙∙∙ “FOLDER” indicator lights.
When “Memory Mode” is selected∙∙“FOLDER” indicator turns
off.
Folder Mode :
All the files in the selected folder are played.
Memory Mode :
After the selected folder and files are played, all the files in all
the folders are played.
3
Use [FOLDER +, –] to select the folder to be played.
4
Use 8, 9 or [o, p] to select the le to be
played.
5
Press <1/3> or [1].
Title name /
Artist name
Title name /
Album name
Playback