To Next PageTo Next Page
Need help?Do you have a question about the Denon DHT-500SD and is the answer not in the manual?
General| Type | Home Theater System |
|---|---|
| Channels | 5.1 |
| Supported Audio Formats | Dolby Digital, DTS |
| Subwoofer | Yes |
| Remote Control | Yes |
| DVD Player | Yes |
| Progressive Scan | Yes |
| Component Video Output | Yes |
| Composite Video Output | Yes |
| Analog Audio Input | Yes |
| Tuner | AM/FM |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | 98dB |
| Impedance | 6 ohms |
| Supported Media | DVD, CD, MP3 |
| Digital Audio Input | Optical |
Important precautions for safe and proper operation of the unit, covering temperature, handling, and cleaning.
Key checks and considerations before operating the system, including moving and power switch procedures.
Guidelines for safe and optimal installation, addressing potential picture interference and heat dissipation.
Important cautions for handling the unit, including input function switching and muting circuit behavior.
Instructions for mounting speakers securely, applying anti-slip pads, and general safety warnings.
Details Dolby Digital, Dolby Pro Logic IIx, DTS, DTS-ES, and DTS Neo:6 for advanced surround sound.
Do not bend, heat, enlarge holes, or write on discs; handle with care to avoid damage.
Load only one disc at a time, ensure proper loading, and be careful of fingers when closing the tray.
Details various connection methods (COMPONENT, S-VIDEO, COMPOSITE) for optimal video signal output.
Connect via COMPONENT VIDEO IN jacks for best picture quality; follow setup steps for activation.
Connect using S-VIDEO for better quality than composite, or RCA for composite video.
Connect the AC power cord to an AC wall socket after all other connections are finished.
Guides on connecting speakers, ensuring correct polarity, secure connections, and proper placement.
Connect via coaxial or optical cables for digital audio input/output to record or transfer digital signals.
Position speakers according to room acoustics for optimal surround effect; place 'L' speakers to the left and 'R' to the right.
Place front speakers in front of the listening position, left and right of the TV, essential for all surround modes.
Place the center speaker between front speakers, on or below the TV, to stabilize the sound image.
Details the buttons, display, and indicators located on the front panel of the unit.
Explains how to operate the unit using the remote control unit by setting mode switches for different functions.
Lists buttons on the remote control unit and their corresponding page numbers for detailed function descriptions.
Covers battery installation and guidelines for using the remote control unit effectively.
Introduces the on-screen display setup functions for configuring speaker settings, distances, and levels.
Input speaker combination and sizes for signal composition and frequency response.
Adjust speaker settings (Large/Small) and subwoofer presence for optimal sound output.
Measure and input speaker distances to set surround delay times for accurate sound localization.
Instructions for exiting setup menus and confirming settings, including options to reset levels.
Adjust playback levels for each speaker using test tones to ensure balanced sound output.
Guides on selecting input sources and gradually adjusting the master volume for playback.
Guides on playing DVD, CD, and VCD discs, including power on, disc loading, and playback initiation.
Navigate to the DVD SETUP menu using the SETUP and ENTER buttons.
Use cursor and ENTER buttons to select and change various DVD playback settings.
Explains how to automatically or manually tune to FM and AM radio stations.
Check power outlet and connections if the unit does not turn on.
Solutions for playback not starting, including disc loading and cleaning.
Restart the unit and playback if the picture freezes or controls become unresponsive.
Check TV connection, power, and input selection if no picture is displayed.
Check connections, cable routing, and component operation to resolve hum or noise issues.
Verify function selection, battery status, and clear obstacles for proper remote control operation.
Ensure correct disc loading, check for dirt, or verify region code if playback fails.
Details audio, tuner, video, and DVD specifications for the main receiver unit.
Provides specifications for satellite, center, and passive subwoofer speakers, including frequency response and impedance.
