Inserting the batteries
1
Slide the rear cover off the remote control unit in the
arrow direction.
2
Insert two batteries correctly into the battery
compartment as indicated.
3
Put the rear cover back on.
NOTE
0
Remove the batteries from the remote control unit if it will not be in use for long
periods.
0
If the battery fluid should leak, carefully wipe the fluid off the inside of the battery
compartment and insert new batteries.
Operating range of the remote control
unit
Point the remote control unit at the remote sensor when operating it.
Contents Connections Playback Settings Tips Appendix
6
To Next Page
Loading...
Need help?
General
