Settings
Perform the below operations and settings as needed.
Sound mode
buttons
BASS
+, –
VOL
+, –
Selecting a sound mode
1
Press the sound mode button to select a sound mode.
When the button is pressed, the rightmost status LED blinks and the
sound mode changes. (v p. 9)
MOVIE:
Enjoy movie theater-like surround
sound.
NIGHT:
Compresses the dynamic range
(difference between loud and soft
sounds) to make audio easier to hear at
low volumes.
MUSIC:
Enjoy the full presence of a wide,
encompassing acoustic field.
DIALOG ENHANCER
LOW / MED / HIGH:
Adjust the volume of dialog in movies,
vocals in music, etc. so these can be
heard more easily. Can be set to 3
levels. Set this to the desired value.
PURE:
Enjoy sound that is faithful to the
original source.
NOTE
0
In pure mode, Dolby Atmos playback is not supported. If a Dolby Atmos signal is
input when in pure mode, the status LED displays the signal input as Dolby (other
than Atmos). (v p. 9)
Contents Connections Playback Settings Tips Appendix
27
To Next Page
Loading...
Need help?
General
