Denon DHT-M330DV - Page 41

41
ENGLISH
2 Table of Surround Mode Parameters (3)
Surround parameter
2ch Mode
SDB/P.EQ
(Default: DEFEAT all OFF)
Analog 2-channel
Surround Mode
DVS: Dolby Virtual Speaker
DH: Dolby Headphone
DOLBY DIGITAL
DTS SURROUND
DOLBY PL
II
AUTO STEREO
DTS NEO:6
DOLBY PL
IIx
DOLBY DIGITAL EX/+PLIIx
DTS SURR.+NEO:6
DTS-ES DISCRETE/MATRIX
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
AUTO DECODE
DVS
2SPEAKER MODE
3SPEAKER MODE
5SPEAKER MODE
DH1
DH2
DH3
BYPASS
DH
STEREO
DIRECT
5CH STEREO
M.CH STEREO
HALL
Digital 2-channel DH1/2/3/BYPASS
C
C
C
C
C
C
C
C
E
C
C
C
C
C
C
C
C
C
C
C
E
C
C
C
E
E
C*3 (PL
IIC)
E
C*3
E
E
E
E
CINEMA only
C*4 (CINEMA)
E
E
E
E
E
E
–
–
–
–
–
–
–
–
–
C*6 (Ref.)
C*6 (Ref.)
Wide only
–
–
–
–
–
–
–
–
–
Presence/absence of signals and controllability in the various modes
SDB ON DRC ON *1
P. EQ1/2/3
C
C
C
C
C
C
C
C
C
C
C
C
E
E
E
E
C
E
E
E
E
C*2
(AUTO ST)
E
E
E
E
CINEMA only
C*4 (CINEMA)
E
E
E
E
E
E
–
–
–
–
–
–
–
–
–
–
–
–
C*5 (DH1)
–
–
–
–
–
Front ch
Ref./Wide
DH Mode DVS Mode
2 Table of Surround Mode Parameters (4) Details of parameters for “6.1CH”/“7.1CH”
Various playback sources and surround parameter selection for “6.1CH”/“7.1CH”
DTS/DTS-ES
6.1ch setting
Surround Mode
DVS: Dolby Virtual Speaker
DH: Dolby Headphone
AUTO STEREO
DTS NEO:6 CINEMA
DTS NEO:6 MUSIC
DOLBY PL
IIx CINEMA
DOLBY PLIIx MUSIC
DOLBY PLIIx GAME
DOLBY DIGITAL EX
DOLBY DIGITAL+PLIIx C
DOLBY DIGITAL+PLIIx M
DTS SURROUND
DTS SURR. +NEO:6
B
C
C
C
C
C
–
–
–
–
–
B
E
E
C
C
C
B
E
C
–
–
2channel source
Mulch channel source
DTS-ES DISCRETE
DTS-ES MATRIX
7.1ch setting 7.1ch setting
–
–
–
–
–
–
–
–
–
–
–
–
–
B
C
Presence/absence of signals and controllability in the various modes
PCM
6.1/7.1 setting
Analog
6.1/7.1 setting
6.1ch setting
B
C
C
C
C
C
–
–
–
–
–
–
–
C
B
C
–
–
–
–
–
–
–
–
–
–
–
B
C
C*FLAG
C*FLAG
DOLBY DIGITAL/D.D. EX
B
E
E
C
C
C
C*FLAG
C*FLAG
–
–
:Mode only usable when “5.1CH” set with quick setup procedure.. B : Factory defaults when “6.1CH” or “7.1CH” set with quick setup procedure.
:Mode only usable when “6.1CH” or “7.1CH” set with quick setup procedure..
C : Playback signal present or selectable.. *FLAG: Selected automatically by “DTS ES DISCRETE FLAG”/”MATRIX FLAG”
E : Playback signal absent or not selectable. – : Not applicable.
( ) : Factory defaults of parameters.
*1: Only selectable for Dolby and DTS DRC (dynamic range compression) compatible [discs]
*2: Auto stereo, DOLBY PLII cinema, PLII music and PLII game selectable.
DTS NEO:6 cinema and NEO:6 music also selectable for PCM sources (other than [those with sampling frequencies of 96 kHz])
*3: DOLBY PLII cinema, PLII music, PLII game, DTS NEO:6 cinema and NEO:6 music selectable.
*4: Cinema (DOLBY PLII cinema) and music (PLII music) selectable.
*5: DH1, DH2, DH3 and “BYPASS” selectable.
*6: “Reference” and “Wide” selectable.
*7: “MAIN” (main audio), “SUB” (sub audio) and “MAIN/SUB” selectable.