Inserting the battery
1
Slide the rear cover off the remote control unit in the
arrow direction.
.
2
Insert 1 battery into the battery compartment as
indicated.
.
3
Put the rear cover back on.
NOTE
0
Remove the battery from the remote control unit if it will not be in use for long
periods.
0
If the battery fluid should leak, carefully wipe the fluid off the inside of the battery
compartment and insert new battery.
Operating range of the remote control
unit
Point the remote control unit at the remote sensor when operating it.
.
Contents
Connections Playback Settings Tips Appendix
5
To Next Page
Loading...
