Denon DL-103R - User Manual

Thank you for your purchase of the DENON DL-103R stereo cartridge.
Read these Operating Instructions carefully before using your DL-103
R and keep it for
future reference.
Accessories
Stylus cleaning brush .................................1 Data sheet .................................................1
Operating instructions ................................1
Before Using
1. The Stylus is very delicate. Applying excessive force to the stylus, such as pressing with a
nger can break it. Handle the cartridge with the utmost care.
2. A powerful magnet is used in the cartridge. Note that carelessly bringing a steel screwdriver
or other such item near the cartridge will result in it being attracted by the magnet and may
result in damage to the stylus, so care must be taken. Be sure to use the stylus cover when
mounting the cartridge in the head shell, or when otherwise handling the cartridge.
Method of Use
1. Mounting to the Head Shell
• Adjust to the stylus position specied for
the turntable system you, are using and
mount properly without tilting or turning
it. (See Figure 1.)
• The output terminals are color coded for
identication as illustrated in Figure 2.
Match the colors of the head shell leads
to the terminals and connect properly.
NOTE:
When connecting the cartridge, be sure
to use the tipped leads and press them
onto the terminals. Applying heat to the
output terminals of the cartridge, such
as in direct soldering, will cause internal
damage to the cartridge, such as wire
breakage.
DL-103R
DL-103R Stereo Cartridge
Operating Instructions
Stylus position
Figure 1. Mounting to the Head Shell
Figure 2. Configuration of the Output Terminals
Left channel
Hot (white)
Left channel
Ground (blue)
Right channel
Hot (red)
Right channel
Ground (green)
EL ER
L R
DL-103R_ENG_00D5114477100.indd 1 2015/12/24 15:14:44

Summary

Before Using

Method of Use

Mounting to the Head Shell

Instructions for mounting the cartridge, matching color-coded terminals, and avoiding direct soldering.

Tracking Force Adjustment

Specifies the recommended tracking force range for the cartridge.

Output Voltage

Details the output voltage and recommends a step-up transformer or head amplifier.

Stylus and Record Cleaning

Guidance on cleaning the stylus and records for optimal performance.

Specifications

Denon DL-103R Specifications

General

Voltage	0.25 mV
Impedance	40 Ω
Compliance	5 x 10-6 cm/dyne
Product color	Black
Frequency range	20 - 45000 Hz
Stylus tip radius	16.5 µm
Tracking force range	2.3 - 2.7 g

Weight and Dimensions

Weight	8.5 g