Denon DN-300Z - Rear Panel

6
7. Function Icons: This shows various symbols to indicate these current functions:
Random Playback (see Operation > Playing Audio CDs or Playing Audio Files for more information)
Repeat One (see Operation > Playing Audio CDs or Playing Audio Files for more information)
Repeat All (see Operation > Playing Audio CDs or Playing Audio Files for more information)
All View (see Operation > Playing Audio Files for more information)
Folder View (see Operation > Playing Audio Files for more information)
Auto Mute (see Operation > Using the Radio for more information)
Power-On Play (see Operation > Additional Functions > Powe
r
-On Play for more information)
Rear Panel
1
2
3
45
87
6
1. FM Antenna Terminal: Connect the included FM antenna to this terminal.
2. AM Antenna Terminals: Connect the included AM loop antenna to this terminal. See Setup / Connection
Diagram for more information.
3. Tuner Region Select Switch: Set this switch according to the area where you live: 1 (North and South America),
2 (Europe and Asia Pacific region), or 3 (Japan).
Note: If the unit is powered on, turn its power off and on again after changing this setting. When the unit powers
on again, it will be set for the selected area.
4. Tuner Outputs (unbalanced): These outputs send the FM/AM audio signal. Use RCA cables to connect these
outputs to external speakers, sound system, etc. See Setup / Connection Diagram for more information.
5. CD/USB/SD/AUX/BT Outputs (unbalanced RCA): These outputs send the audio signals from a CD, USB
device (mass storage class), SD card, device connected to the Aux In, and connected Bluetooth device. Use
RCA cables to connect these outputs to external speakers, sound system, etc. See Setup / Connection
Diagram for more information.
6. CD/USB/SD/AUX/BT Outputs (balanced XLR): These outputs send the audio signals from a CD, USB device
(mass storage class), SD card, device connected to the Aux In, and connected Bluetooth device. Use XLR cables
to connect these outputs to external speakers, sound system, etc. See Setup / Connection Diagram for more
information.
7. Bluetooth Antenna Terminal: Connect the included Bluetooth antenna to this terminal. The antenna receives
and transmits the Bluetooth signal from and to your Bluetooth device, if it is within range.
8. AC In: Use the included power cable to connect this input to a power outlet. See Setup / Connection Diagram
for more information.