EasyManua.ls Logo

Denon DN-300Z - Operation Guide; Selecting Media Playback Mode; Playing Audio CDs

Denon DN-300Z
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Operation
Selecting the Media Playback Mode
To select what kind of media you want to play:
1. When the unit is stopped or paused, press the Media Button.
2. To cycle through the available options, turn the Jog Dial or press the Media Button on the unit. If you are using
the remote control, press the CD/USB/SD/Aux or FM/AM buttons.
CD or CDR: audio CD (CD) or CD with audio files (CDR) (see Playing Audio CDs and Playing Audio Files)
USB: USB device (mass storage class) (see Playing Audio Files)
SD: SD or SDHC card (see Playing Audio Files)
AUX: device connected to Aux In (see Playing Audio from an External Device)
BT: Bluetooth device (see Playing Audio from a Bluetooth Device)
FM: FM radio broadcast (see Using the Radio)
AM: AM radio broadcast (see Using the Radio)
3. To confirm your choice, press the Jog Dial on the unit, or press the Enter Button on the remote control.
Important: The DN-300Z will remember this setting even if you power off the unit.
Playing Audio CDs
To play audio CDs:
1. If the unit is off, press the Power Button to power it on.
Important: Do not insert a CD when the power is off. Doing so may
damage the unit.
2. Insert a CD into the CD Slot. (Hold the edges of the CD without touching
the recorded surface. Be careful not to trap your fingers when the disc is
drawn into the unit.)
Important: This unit can play finalized discs only. (Finalization is the
process that makes recorded CD-R discs playable on compatible players.)
3. Select CD as the media type (described in Selecting the Media Playback
Mode).
4. To start playback, press the Play button on the unit or remote control.
In CD Mode, you can perform any of the following operations:
To start, resume, or pause playback, press the Play/Pause Button on the unit or remote control.
To stop playback, press the Stop Button on the unit or remote control.
To rewind or fast-forward through the track, press and hold one of the Search Buttons on the unit or remote
control. Initially, the track will rewind/fast-forward at 5 times the normal playback speed. After holding the button
for more than 1 second, the track will rewind/fast-forward at 30 times the normal playback speed. To resume
playback, release the button.
To return to the start of the current track, turn the Jog Dial counterclockwise one notch on the unit, or press
the “back” Skip Button once on the remote control.
To skip to the previous or next track, press one of the Skip Buttons on the remote control.

Other manuals for Denon DN-300Z

Related product manuals