EasyManuals Logo

Denon DN-700R Serial Command Protocol Guide

Denon DN-700R
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
Control Commands
(Host DN-700R)
CATEGORY CONTENTS CODE DESCRIPTION
Track Selection
Next Track @02332\r Skips to the next track in the tracklist
Hot Start Cue Up @0HCnn\r
Cues up the track assigned the entered hot start
number, where nn (the hot start number) = 01
20
Select Track Number (3
digit)
@0TRnnn\r
Selects the track corresponding to the entered
file number, where nnn (the track file number) =
001999
Select Track Number (4
digit)
@0Trnnnn\r
Selects the track corresponding to the entered
file number, where nnnn (the track file number) =
00012000
Select Folder Number
@0Sfnnnn\r
Selects the folder corresponding to the entered
number, where nnnn (the folder number) = 0001
2000
Set File Order
@0FRXX\r
Sets whether files in media source folders are
ordered alphabetically or by date, where XX (the
setting) = AL (alphabetically) or DA (date)
Load Program List @0PlXXXX\r
Loads the program list, where
X
X
X
X stands for
the program list’s file name (absolute path
required)
See Appendix > Entering the Absolute Path
for Folder and File Names for details on the
requirements for entering absolute paths
Add to Program List @0PinnNNNN\r
Adds the track to the currently loaded program
list, where nn (the desired position in the
program list) = 0199, and NNNN (the track file
number) = 00012000
Take Off Program List @0Pmnn\r
Removes a track from its position in the
currently loaded program list, where nn (the
position in the program list) = 0199
Save Program List
@0PsXXXX\r
Save the currently loaded program list as a new
file, where XXXX stands for a file name of up to
252 characters (absolute path required)
See Appendix > Acceptable Characters for
Serial Communication for details on which
characters can be used in the name of the
program list file
See Appendix > Entering the Absolute Path
for Folder and File Names for details on the
requirements for entering absolute paths
Track Searching
Rewind (cyclic) @02350\r
Rewinds the current track; each entry of the
command cycles through the rewind speeds (2x,
10x, 50x, 100x, and 200x)
Rewind (specific) @02350n\r
Rewinds the current track at a specific speed,
where n (the speed) = 1 (for 2x), 2 (for 10x), 3 (for
50x), 4 (for 100x), or 5 (for 200x)
Skip Back @023SB\r
Rewinds the current track by a set number of
seconds

Other manuals for Denon DN-700R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon DN-700R and is the answer not in the manual?

Denon DN-700R Specifications

General IconGeneral
BrandDenon
ModelDN-700R
CategoryRecording Equipment
LanguageEnglish

Related product manuals