Need help?Do you have a question about the Denon DN-A100 and is the answer not in the manual?
General| Signal-to-Noise Ratio | 100dB |
|---|---|
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Speaker load impedance | 4-16 ohms |
| Total harmonic distortion | 0.08% |
| Frequency Response | 20Hz to 20kHz |
| Input Impedance | 47k ohms |
Warning against opening the unit to prevent electric shock.
Caution against exposing the appliance to rain or moisture to prevent fire or shock.
Instructions for safely disconnecting the unit from mains power supply.
Important points to check before operation, including moving the unit and turning on power.
Identification and function of buttons and knobs on the front panel.
Instructions and precautions for connecting speakers, including impedance matching.
A guide to diagnosing and resolving common operating problems.
Detailed technical data for the amplifier and remote control unit.
To Next Page
