What to do if there is incorrect Audio or Video for selected source on Denon DN-A7100 Amplifier?
If you are experiencing incorrect Audio or Video for the selected source, the input cable may be connected incorrectly. Refer to the connection diagram and connect the cable correctly.
Why is there noise during AM reception on my Denon DN-A7100 Amplifier?
If you're hearing noise during AM reception on your Denon Amplifier, it could be due to interference from other electrical fields. Try relocating the AM indoor antenna.
How to fix a Denon DN-A7100 Amplifier remote control that is not working?
If the remote control isn't working with your Denon Amplifier, the batteries might be dead. Replace all the batteries with new ones.
What to do if Surround mode is not EX/ES mode on Denon DN-A7100 Amplifier?
Set surround mode to EX/ES.
Why is there noise during DTS-encoded CD or laser disc play on my Denon Amplifier?
If noise is produced during DTS-encoded CD or laser disc play, analog may have been selected for input. Ensure you perform a digital connection, select digital input, and then play.
What to do if the distance between my DN-A7100 Denon Amplifier and the remote commander is too far?
Move closer to this DN-A7100.
Why can't I select EX/ES mode on my Denon DN-A7100?
If you cannot select EX/ES mode on your Denon Amplifier, it is possible that “Surround center= NONE” has been selected in SPEAKERS SIZE SETUP. Make the correct setting.
Why can't I select Pro Logic IIx mode on my Denon DN-A7100?
If you cannot select Pro Logic IIx mode on your Denon Amplifier, the input signal is likely incompatible. Use a 2 channel Dolby Digital input signal, PCM input signal, or analog input signal.
What to do if Something is blocking my DN-A7100 Denon Amplifier and the remote commander?
Remove the object that is blocking the signal.
Why is there no audio output from the surround back speakers on my Denon DN-A7100?
If you're not getting any audio output from the surround back speakers on your Denon Amplifier, the surround back speaker cable connection might be incomplete. Ensure the cable is correctly connected.
General| Total Harmonic Distortion (THD) | 0.08% |
|---|---|
| Input Sensitivity | 200mV |
| Signal-to-Noise Ratio | 100dB |
| Output Connectors | HDMI, Component, Composite, S-Video, Analog Audio, Speaker Binding Posts |
| Cooling | Fan |
| Protection | Yes |
| Power Supply | AC 50/60Hz |
Read all safety and operating instructions before use and retain for reference.
Welcome message, overview of the product, and description of audio technologies.
Highlights key features like HDCD, HDMI, and lists included accessories.
Detailed explanation of front panel buttons, knobs, indicators, and the FL display.
Identifies and explains all input and output terminals on the rear panel.
Covers remote control functions, buttons, battery loading, and setup.
Guides on ideal speaker placement, height, and initial setup configuration.
Instructions for connecting audio, video, digital components, and antennas.
Guides users through the on-screen menu system for configuring settings.
Step-by-step setup for assigning inputs, configuring speakers, and setting preferences.
How to choose input sources and select various surround sound modes.
Adjusting audio levels, tone, using sleep timer, and night mode.
Procedures for recording, using HT-EQ, and managing 7.1 channel inputs.
Instructions for listening to FM/AM radio and XM satellite radio, including tuning and presets.
Operating HDMI, other functions like TV Auto, and display modes.
Solutions for common problems and symptoms encountered during operation.
Technical details for controlling the unit via RS-232C communication.
Detailed technical data including frequency ranges, sensitivity, and physical dimensions.
To Next Page
