Denon DN-A7100 - Page 49

46
ENGLISH
STATUS REQUEST AND STATUS ANSWER LIST
Normal Status request and Status (answer and feedback) list
Status request Status answer and feedback
POWER “PWR:?”
OFF “PWR:1”
ON “PWR:2”
AUDIO ATT “ATT:?”
OFF “ATT:1”
ON “ATT:2”
AUDIO MUTE “AMT:?”
OFF “AMT:1”
ON “AMT:2”
VIDEO MUTE “VMT:?”
OFF “VMT:1”
ON “VMT:2”
VOLUME “VOL:?” Volume value = xxx “VOL:xxx”
TONE BASS “TOB:?” Bass value = xxx “TOB:xxx”
TONE TREBLE “TOT:?” Treble value = xxx “TOT:xxx”
SOURCE Select “SRC:?”
Video+Audio source
(v ,a= ‘0’ – ‘F’)
(v = video, a = audio.)
“SRC:va”
Multi Channel “71C:?”
OFF “71C:1”
ON “71C:2”
Status request Status answer and feedback
SLEEP “SLP:?” Sleep time (xx = 00 ~ 99) “SLP:xx”
MENU “MNU:?”
OFF “MNU:1”
ON “MNU:2”
Status request Status answer and feedback
Simple Setup “SSU:?”
OFF “SSU:1”
ON “SSU:2”
Status request Status answer and feedback
Digital Signal Format “SIG:?”
x =
‘0’ : No detect
‘1’ : D DIGITAL AC-3
‘2’ : D DIGITAL SURROUND
‘3’ : D DIGITAL SURR. EX
‘4’ : DTS
‘5’ : DTS ES DISCREATE
‘6’ : DTS ES MATRIX
‘7’ : AAC
‘8’ : MPEG
‘9’ : MLP
‘A’ : PCM
‘B’ : HDCD
‘C’ : DSD
‘D’ : reserved
‘E’ : reserved
‘F’ : OTHER
“SIG:x”
x = signal
Status request Status answer and feedback
Lip Sync. “LIP:?”
Lip Sync. : xxx = 000 (OFF)
xxx = 010 ~ 200 (ms)
“LIP:xxx”
Night Mode “NGT:?”
OFF “NGT:1”
ON “NGT:2”
Status request Status answer and feedback
XM Ch Name “CHN:?” Channel Name
“CHN:********”
*=10Byte If data is
shorter than 10,
Space is padded.
XM Artist Name “ARN:?” Artist Name
“ARN:********”
*=16Byte If data is
shorter than 16,
Space is padded.
XM Song Title “SON:?” Song Title
“SON:********
*=16Byte If data is
shorter than 16,
Space is padded.
XM Category Name “CTN:?” Category Name
“CHN:********”
*=8yte If data is
shorter than 8,
Sace is padded.
XM Signal Status “SST:?” Antenna Status
“SST=*”
0=CHECK ANTENNA
1=STRONG
2=MARGINAL
3=WEAK 4=NO
Status request Status answer and feedback
Tuner Frequency “TFQ:?”
xxxxx = frequency
if (xxxxx < 00256) band = XM;
if (xxxxx < 02000) band = AM;
else band = FM;
“TFQ:xxxxx”
Tuner Preset “TPR:?” xx = preset number (01 ~ ??) “TPR:xx”
Tuner Mode “TMD:?”
- (None) “TMD:0”
OFF (MONO) “TMD:1”
ON (AUTO) “TMD:2”