Denon DN-HS5500 - Page 35

30
ENGLISH
ENGLISH
• Creating databases
1
Creating databases
q At the top menu in the
Utility mode, turn the
PARAMETERS knob and
select “Create”.
Press the knob
again to enter.
w The unit is set to
the mode for
creating databases.
2
Selecting the device
q A list of the currently
connected devices (with
database) is displayed on
the left side of the
screen.
w Turn the
PARAMETERS
knob and select the
device for which
you want to create
the database.
Press the knob
again to enter.
NOTE:
It is possible to create databases even for devices
for which a database already exists. Doing so,
however, creates a new database, so playlists
created up to that point are deleted.
3
A message asking
whether you want to
create the database or
not pops up at the
bottom left of the
screen.
• When “OK” is
selected:
Creation of the database for the device set in
step 2 starts.
A progress bar is displayed, showing you the
progress of the database creation operation.
An indicator indicating that a database is being
created is displayed even while playing
MP3/WAV files.
• When “Cancel” is selected:
No database is created for the device set in
step 2 and the screen returns to as it was in
step 2.
• Updating the database
1
Updating the database
q At the top menu in the
database edit mode, turn
the PARAMETERS knob to
select “Update”.
Press the
PARAMETERS
knob to set.
w The updating mode
is set.
2
Selecting the device
q The currently connected
devices (with database) are
displayed on the left side of
the screen.
w Turn the
PARAMETERS
knob to select the
device whose
database is to be
updated.
Press the
PARAMETERS
knob to set.
✽ Devices cannot be selected if they have no
database.
3
Selecting whether to add or
delete
q Use the PARAMETERS
knob to select “ADD” or
“Delete”.
• ADD:
When there are
files not registered
in the database,
those files are
registered in the
database.
• Delete:
Files that are registered in the database but do
not actually exist are deleted from the
database.
• When “Cancel” is selected:
The operation is ended without updating the
database for the device selected in step 2.
The screen in step 2 reappears.
• Creating temporary databases
Use this procedure to create a database searchable by
file name only.
This database can be created faster than a full database.
Searching using ID3 Tag data is not possible.
However, String Search is possible.
1
Creating temporary databases
q At the top menu in the
Utility mode, turn the
PARAMETERS knob and
select
“Temporary”.
Press the knob
again to enter.
w The unit is set to
the mode for
creating the
temporary
database.
2
Selecting the device
q A list of the
currently connected
devices is displayed
on the left side of
the screen.
w Turn the
PARAMETERS
knob and select the device for which you
want to create a temporary database.
3
A message asking
whether you want to
create a temporary
database or not pops
up at the bottom left of
the screen.
q When “OK” is
selected:
Creation of the temporary database for the
device set in step 2 starts.
A progress bar is displayed, showing you the
progress of the temporary database creation
operation.
An indicator indicating that a temporary
database is being created is displayed even
while playing MP3/WAV files.
w When “Cancel” is selected:
The temporary database for the device set in
step 2 is not created and the screen returns to
as it was in step 2.
2
Hotlist Edit
Use this to delete the hotlist.
• Hotlist Edit mode
1
With the top menu in the utility
mode displayed, turn the
PARAMETERS knob to select
“Hotlist Edit”.
Press the
PARAMETERS knob to
set.
2
The “Hotlist Edit” item is
displayed.