Need help?Do you have a question about the Denon DP-3000NE and is the answer not in the manual?
General| Speed | 33-1/3 rpm, 45 rpm |
|---|---|
| Tracking Force Adjustment Range | 0 to 4 g (in 0.1 g increments) |
| Output Terminal | RCA x 1 |
| Output Level | 2.5 mV |
| Signal-to-Noise Ratio | 80 dB |
| Frequency Response | 20 Hz - 20 kHz |
| Platter | Aluminum die-cast |
How to attach the counterweight to the tone arm shaft.
Attaching the cartridge to the head shell and connecting lead wires.
Using the overhang gauge to set cartridge position for optimal tracking.
Inserting the head shell into the tone arm tip assembly.
Leveling the turntable by adjusting the height of its feet (insulators).
Setting the correct downward force for the stylus on the record.
Adjusting the counterweight to make the tone arm float parallel to the platter.
Aligning the stylus pressure adjustment ring to the zero mark on the tone arm.
Adjusting the counterweight to achieve the specified cartridge stylus pressure.
Counteracting the inward force on the stylus caused by record rotation.
Ensuring the tone arm is parallel to the record for proper groove tracing.
Detailed diagram for connecting to amplifier using audio and earth cables.
How to connect the power cord to the unit and outlet for different regions.
Steps for playing a record: placing, speed setting, and starting.
Steps to safely stop record playback and return the tone arm.
Lists common problems and their corresponding page numbers for quick reference.
To Next Page
