Hum noise is heard
Hum noise is heard.
0
Check that the earth wire of the audio cable is connected to the amplifier. (v p. 24)
0
Check that the audio cable is connected to the amplifier correctly. (v p. 24)
0
Check that the head shell is securely fastened to the tone arm. (v p. 14)
Audio skips, scratches or is distorted
Audio skips, scratches or is distorted.
0
The correct stylus pressure is not applied. Adjust to the correct pressure. (v p. 17)
0
Make sure there are no scratches on the record.
0
Make sure the record is not warped.
0
Make sure there is no dirt or dust on the stylus or the record.
Contents
Preparations Connections Playback Tips Appendix
32
Front Rear
To Next Page
