Denon DP-450USB User Manual

Mounting the turntable
1
Mount the hole in the center of the turntable on the
center spindle.
2
Turn the turntable until the roller of the main unit is
visible from the square hole on the side with the ribbon
tape.
3
Pull out the ribbon tape, and hang the belt on the roller.
0
Remove the ribbon tape after hanging the belt.
.
Ribbon tape
Belt
Roller
Square hole
0
Take care not to twist the belt when hanging it.
0
Store the ribbon tape after use, as it is required when replacing the belt.
4
Mount the turntable sheet on the turntable.
0
Mount the sheet with the side featuring the DENON logo facing down.
Contents Preparations Connections Playback and recording Tips Appendix
13
Front panel Rear panel

Denon DP-450USB Specifications

General

Type	Belt-drive audio turntable
Equalizer	Yes
Operation	Manual
Motor type	DC motor
Stylus type	mm
Belt material	Rubber
Certification	CE
Product color	Black
Wow & flutter	0.08 %
Nominal speeds	33 1/3, 45, 78 RPM
Volume control	Rotary
Signal-to-Noise Ratio (SNR)	65 dB
Frequency range	20 - 20000 Hz
Quantity	1
Shape	S-shaped tonearm
USB version	2.0

Weight and Dimensions

Depth	342 mm
Width	414 mm
Height	132 mm
Weight	5800 g