Attaching the dust cover
1
Mount the hole on the dust cover on the center spindle.
.
0
Remove the dust cover before record playback.
Using the dust cover as a record stand
Attach the dust cover to the included dust cover stand to use it as a record
stand. Use it in this way when it is not attached to the main unit.
1
Face the dust cover as shown in the picture below to
insert it into the groove in the dust cover stand.
.
Contents
Preparations Connections
Playback and recording
Tips Appendix
15
Front panel Rear panel
To Next Page
Loading...
Need help?
General
Weight and Dimensions
