Denon DRA-100

.
wq e
iuyytroo
A
Speaker terminals (SPEAKERS)
Used to connect speakers. (v
p. 17)
B
SUBWOOFER OUT connector
Used to connect a subwoofer with a built-in amplifier. (v p. 18)
C
DIGITAL IN connectors
Used to connect devices equipped with digital audio connectors.
0
“Connecting a digital device (Optical)” (v
p. 20)
0
“Connecting a digital device (Coaxial)” (v p. 21)
D
AC inlet (AC IN)
Used to connect the supplied power cord. (v
p. 28)
E
AUDIO OUT connectors
Used to connect devices equipped with analog audio inputs connectors
or an external pre-main amplifier. (v
p. 22)
F
Wi-Fi connect buttons (iOS/WPS)
Used to connect to the wireless LAN.
(See the separate “Quick Setup Guide”.)
G
NETWORK connector
Used to connect this unit to the network. (v
p. 25)
H
ANALOG IN connectors
Used to connect devices equipped with analog audio connectors.
(v p. 19)
I
Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for Bluetooth/wireless
connectivity when connecting to a network via wireless LAN, or when
connecting to a handheld device via Bluetooth. (v
p. 26)
1. Place the external antennas for Bluetooth/wireless connectivity
evenly over the screw terminal of rear.
2. Turn clockwise until the antennas is fully connected.
3. Rotate the antenna upwards for best reception.
.
123
Contents
Connections Playback Settings Tips Appendix
12
Front panel Rear panel
Remote control
unit
Index