Sleep timer function
You can have the power automatically switched to standby once a set time
has elapsed. This is convenient for listening while going to sleep.
1
Press SLEEP during playback and select the setting
time.
0
The o indicator on the display lights.
0
You can set the sleep timer in the range from 10 to 90 minutes in
steps of 10 minutes.
o
To cancel the sleep timer
Press SLEEP to set “Sleep 1Off”.
The o indicator on the display turns off.
0
The sleep timer setting is canceled when the unit switches to standby mode.
0
To check the time remaining until the sleep timer is activated, press SLEEP.
Switching the display’s brightness
1
Press DIMMER.
0
The brightness of the display switches each time the button is
pressed (3 levels).
Contents Connections Playback Settings Tips Appendix
70
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
